°º♥º°¨¨ º ¨¨°º♥º°¨¨ º ¨¨°º♥º°¨¨ º ¨¨°º♥º°¨¨ º ¨¨°º♥º°°º♥º°¨¨ º°
STEP #1
* Materials & Tool List:Pasta Machine
Gold Glitter
Black Glitter
Tear Drop Cutter
Clay Blade
Pro Kemper Tool
2 oz Premo Black Clay # 5042
2 oz Premo Gold Clay # 5303
1 x 3/4 " glass oval Cabochon
Swarovski Crystal Elements 18pp
Bail or Pin Back
Acrylic Roller
Optional:
Pearls or other stones for decorations instead of crystals
Micro Beads
Sculpey Bake & Bond
Sculpey Glaze
°º♥º°¨¨ º ¨¨°º♥º°¨¨ º ¨¨°º♥º°¨¨ º ¨¨°º♥º°¨¨ º ¨¨°º♥º°°º♥º°¨¨ º°
°º♥º°¨¨ º ¨¨°º♥º°¨¨ º ¨¨°º♥º°¨¨ º ¨¨°º♥º°¨¨ º ¨¨°º♥º°°º♥º°¨¨ º°
Step #2
~ Cut 1/4 of the Premo Gold Package and condition it as normal
~ Cut 1/8 of the Premo Black Package and condition it as normal
~ Shape both into pearl drops and flatten together as shown in the photo
~ Using an acrylic roler flatten our the two tear drops so that they fit nicely into the largest setting on the pasta machine.
~ Once it is flattened it is ready for the next step.
~ This skinner blend it called a Tear Drop Skinner Blend: I learned this from a tutorial by Cindy Leitz Volume 35 of her tutorials : http://www.beadvideos.com/video/035-3-teardrop-blend-shift/ . I love the way this makes your skinner blends. It is a tutorial worth purchasing. As many of hers are.
°º♥º°¨¨ º ¨¨°º♥º°¨¨ º ¨¨°º♥º°¨¨ º ¨¨°º♥º°¨¨ º ¨¨°º♥º°°º♥º°¨¨ º°
Step #3
~ Making our Skinner Blend
~ Turn the pasta machine on the largest setting.
~ Put your flattened two color blend in the machine.
~ I like to hold my hand on the open side of the blend so that it does not become odd shaped. So while it runs through I just hold a
few fingers on the open end to keep it in shape and going through the pasta machine straight.
~ When it rolls out of the pasta machine fold it in half from tip to tip keeping it as straight as possible, I keep folding it the same way
every time it comes through. I put mine through 18 times until I liked the blend of Black and Gold for my project. You may want
blend yours a little more or less. It will look great any way you choose to blend it. Skinner blends are always pretty.
°º♥º°¨¨ º ¨¨°º♥º°¨¨ º ¨¨°º♥º°¨¨ º ¨¨°º♥º°¨¨ º ¨¨°º♥º°°º♥º°¨¨ º°
Step #4
~ Lay the skinner blend flat and set it aside until it is needed
°º♥º°¨¨ º ¨¨°º♥º°¨¨ º ¨¨°º♥º°¨¨ º ¨¨°º♥º°¨¨ º ¨¨°º♥º°°º♥º°¨¨ º°
~ Now its time to make the base of your pendant or pin
~ Cut 1/8 of the 2 oz Premo Black clay and condition it as normal
~ Roll it into a ball then sofly flatten it onto your work area and shape into an oval
~ Your black oval shape should be approximatly 1" wide by 1 1/2 " long
~ You can flatten it lightly with the acrylic roller if needed. It is ok to have finger prints they will be covered up. When you use your thumb you tend to leave less of a print.
~ At this step you will need to have your glass Cabochon available, it will need to be 3/4 " wide by 1" long beveled glass or a rounded glass is fine. ( I will give you a link to purchase these at the bottom of the tutorial).
°º♥º°¨¨ º ¨¨°º♥º°¨¨ º ¨¨°º♥º°¨¨ º ¨¨°º♥º°¨¨ º ¨¨°º♥º°°º♥º°¨¨ º°
Step #6
~ At this point choose your glitter colors and lay your Black clay oval and glass Cabochon next to each other for the next step.
~ I Chose Gold and Black fine grain glitters.
~ Optional : Different grain glitters, sequins, crystal elements, Or using texture make a texture impression in the center only.
Step #7
~ Take the glass Cabachon and center it in the black oval. Lightly push straight down enough to make a slight indention
in the black base. Then remove the Glass Cabachon and set it aside. Now your ready for the next step
Step #8
~ Sprinkle your glitter colors in any combination that you like. I sprinkled a couple layers of each color, its hard to
see the black but it is there. It is ok if you get a little on the sides or on the whole base. It will be covered with petals.
~ Optional: you can sprinkle thin sprinkles of glitter on the whole base. Just use your finger and lightly press the
glitter sprinkles on if you adding to the area outside the indented oval. And be sure to glaze your project so
Step # 9
~ Place the glass Cabachon back into the indented area and press down approxamiatley half way so that the black curls
up around the glass Cabochon nicely as shown. If you have to much clay that comes up. that is ok. Just use your finger
Step #10
~ Now you have your Cabochon ready to decorate. Cut a thin strip of your mixed clay and make a long snake by rolling it on
your work space. Your snake will need to be approximatly 2 1/2 inches long 1-2mm thick. It is ok to twist it to give more
detail if you like or slice two different areas of the clay and twist them together for more color.
~ Starging at the bottom center of the Cabachon, use your fingers lightly lay the snake around the inside edge of the Cabochon
and wrap it around and end it at the bottom again connecting the two ends. Cut off the excess with your clay blade. It will
be covered with petals so do not worry about the closure of the two snakes. Just tuck them together nicely. DO NOT PRESS
THE SNAKE DOWN FLAT . You want it to have definition and detail. So leave it full and thick.
~ If you had excess black clay around the center this is a good way to cover up any imperfections or if you had to remove clay
Step # 11
~ Using the small tear drop cutter from your Premo Mini Metal Cutters cut out multiple petals from different areas on
your skinner blend clay. The idea is to have various shades of golden and black throughout the flowers, it makes a
really nice contrast when finished. Its ok to cut them one at a time as you need them too. I just cut various petals to
Step #12
~ Take each tear drop and with your thumb and pointer finger pinch the pointed end of the tear drop together to
make a petal. Twist and remove the tail. Set all the tails aside and save them. You will be using them later on in
the tutorial. Once you have all your petal shapes made set them aside for the nest step.
~ OPTIONAL : now would be a chance for you to put detail into your petals if you choose to. A line down the
center or a tiny pinched pint at the top of the petal. Any detail you choose. Make it your own it will look great
Step #13
~ Now its time to start adding some Decorations to our Cabachon. Lets start with Flower Petals.
Step #14
~ Remember to add differemt color petals for a good color scheme. Continue to add petals next to each other you can
attach them lightly once you have them in place with your silver pointed tip tool or pro kemper tool. I only wanted
a half flower on the bottom so only add three petals here.
Step #15
~ Choose petals with different shades for the flower on top of the Cabochon.
~ Follwing the same steps as in 13-14 add a full flower approximatly 5 petals depending on your size of petals.
~ Once you have the petals in place attach them by lightly pressing down in the center of the Petals with your tool to
leave a small but light indention in the clay. You do not want to press to hard. Just enough to connect it. It will
Step # 16
~ Now its time to use all the excess ends from the petals you pinched off.
~ Pick a few different colored scraps and roll them out into snakes about 1/2mm thick.
~ Then twist two of the clay snakes to make a pretty muliti gold colored snake, make two twisted snakes for the
Step # 17
~ For the next step were going to attach one of the snakes to the right side of the Cabochon. Using your needle
tool or pro kemper tool lightly lift up one of the petals and With the point of the tool tuck the twisted clay
under the petal. Lightly pressing down with the point of the tool to attach it under the petals. Do not press
Step #18
~ Once you have attached one end of your twisted clay you want to lay it on the side of the Cabachon to add a
little design. I \made a swirl on the black clay then over the top of the center Cabachon. It is ok to swirl it on
the top of the glass. It gives pretty definition and design. It will bake to the glass but if you want at this point
you can add a light drop of Sculpey Bake & Bond just under where the twisted clay where it touches the glass.
You wont need much at all. Just a pin tip dot of Bake and Bond. I didnt use any but some like to use a bonding
agent when using clay and glass. After twisting and making loops or whatever you like tuck the end of the
the snake under another petal on the bottom of the Cabochon. Pressing lightly with the tip of the Tool to attach
Step # 19
°º♥º°¨¨ º ¨¨°º♥º°¨¨ º ¨¨°º♥º°¨¨ º ¨¨°º♥º°¨¨ º ¨¨°º♥º°°º♥º°¨¨ º°
Step # 20
~ This is a just a view of the Cabochon with the twisted clay on the glass. You can put the twisted clay in any
Step #21
~ With your blade cut off small pieces of clay from different color of your clay snakes. Approximatly 1-2 mm
°º♥º°¨¨ º ¨¨°º♥º°¨¨ º ¨¨°º♥º°¨¨ º ¨¨°º♥º°¨¨ º ¨¨°º♥º°°º♥º°¨¨ º°
Step # 22
~ Once you form the tear drop attach it to the tool as shown. Lay it down at this angle on the base so you do not
flatten the whole petal when you put it in place. You only neet to attach the front part of the petal or the pointed
part of the petal.
°º♥º°¨¨ º ¨¨°º♥º°¨¨ º ¨¨°º♥º°¨¨ º ¨¨°º♥º°¨¨ º ¨¨°º♥º°°º♥º°¨¨ º°
Step #23
~ Using you tool now you are going to add the tiny little petals to the Cabochon.
~ With your tool of choice place the tool onto the ball as shown in Step #22 and place the petals along the
twisted clay. It will make it lool like little leaves or flower petals. Lightly attaching them just under the
twisted clay by pressing lightly at the pointed end of the tiny petals. When you press down only along
Step #24
~ Now we want to add some little flower petals to the centers of the flowers. With your tool of choice attach
three little petals to the center of the bottom flower on the Cabochon. When you place them you want to place
°º♥º°¨¨ º ¨¨°º♥º°¨¨ º ¨¨°º♥º°¨¨ º ¨¨°º♥º°¨¨ º ¨¨°º♥º°°º♥º°¨¨ º°
Step # 25
°º♥º°¨¨ º ¨¨°º♥º°¨¨ º ¨¨°º♥º°¨¨ º ¨¨°º♥º°¨¨ º ¨¨°º♥º°°º♥º°¨¨ º°
Step # 26
~ Turn your Cabochon around and add some small petal leaf details to the other side. You can add as many as you
want. The more detail the better and remember to use different color petals for more color on your piece. The multi
mix of golden black colors of your colors of choice will look really pretty once finished. That is one great think
about a skinner blend the lovely shade of colors and the changes that are in it. Makes for an interesting effect on
on any piece of work no matter what your making. °º♥º°¨¨ º ¨¨°º♥º°¨¨ º ¨¨°º♥º°¨¨ º ¨¨°º♥º°¨¨ º ¨¨°º♥º°°º♥º°¨¨ º°
Step # 27
~ Take a good look at your work from a top view and all sides. I did and decided to add a few more tiny
petals which is why I say to save all the scrap tails off the pinched petals. Just in case you want to add
Step # 28
~ Top view of pendant. Happy with it? I am. I love the shaded looks of the clay. But I want to of course add
some bling. This girl loves bling. Swarovski Crystals are my best friend. I added two 24pp swarovski
crystal elements foil back crystals in topaz to the centers of both flowers.
~ Optional: feel free to add more crystals to the black part of the base on the sides for more detail or bling or
another fun option is micro beads. I didnt have any that matched but I have some on order. Micro beads
are tiny but they give lots of amazing detail. My next project will have those in there and I will share on
where to get them and how to use them.
~ Bake your Clay Cabochon by your clay choice's manufactures directions on the side of the package.
~ TIP: IF THERE IS IN ANY CRACKING IN THE BASE WHICH SOMETIMES HAPPENS IN ANY
PROJECT. RUN IT UNDER COLD WATER. CAUTION. DO NOT PUT THE GLASS PART UNDER
WATER OR IT WILL SHATTER. HOT GLASS AND WATER DO NOT MIX. I learned that the hard
way on a few gorgeous projects. When the clay crack is under the running cold water massage the area
and press the crack together with your fingers. If you do it right away while it is hot it should seal together
nicely. If not dont give up on your work. You can always add some bake and bond and a few more petals
NOW YOUR FINISHED. YOU MAY ADD GLAZE OF CHOICE TO YOUR PROJECT OR LEAVE IT
MATTE FINISH. ONE THING I LOVE ABOUT PREMO ACCENTS THEY SHINE AND YOU DONT
ALWAYS HAVE TO GLAZE. ADD A PIN OR PIN/PENDANT COMBINATION TO THE BACK OF
THE CABOCHON AND WEAR WITH PRIDE. HOPE YOU ENJOYED CREATING MY PIN/PENDANT
°º♥º°¨¨ º ¨¨°º♥º°¨¨ º ¨¨°º♥º°¨¨ º ¨¨°º♥º°¨¨ º ¨¨°º♥º°°º♥º°¨¨ º°
HAPPY CREATING HANDMADE. CREATE WITH LOVE, COLOR AND BLING AND
YOU WILL ALWAYS BE HAPPY WITH EVERYTHING :)
°º♥º°¨¨ º ¨¨°º♥º°¨¨ º ¨¨°º♥º°¨¨ º ¨¨°º♥º°¨¨ º ¨¨°º♥º°°º♥º°¨¨ º°
If you have any questions Please feel free to email me or message me on here by posting your questions. I will help or give
tips in any way that I can. If you want to try a different clay and are not sure on curing time or how to change up the mix.
Please feel free to ask. I would love to help. Hugs and Thanks for stopping by. Happy Creating & Keep stopping by. Hugs.
ჱܓƸ̵̡Ӝ̵̨̄Ʒ Kimberly ჱܓƸӜƷ
°º♥º°¨¨ º ¨¨°º♥º°¨¨ º ¨¨°º♥º°¨¨ º ¨¨°º♥º°¨¨ º ¨¨°º♥º°°º♥º°¨¨ º°
WHERE TO PURCHASE PRODUCTS:
Glass Cabachons in Many sizes and shapes :
fabulousbrass on Etsy: http://www.etsy.com/shop/fabulousbrass/search?search_query=glass&search_submit=&search_type=user_shop_ttt_id_6382678&shopname=fabulousbrass
TheCraftyDragonfly on Etsy : http://www.etsy.com/shop/TheCraftyDragonfly/search?search_query=glass+&search_submit=&search_type=user_shop_ttt_id_5255495&shopname=TheCraftyDragonfly
ჱ
ܓƸ̵̡Ӝ̵̨̄Ʒ
Sculpey Products: I prefer dickblicks customer service to polymerclayexpress. Faster and orders are accurate.
Premo Mini Cutters: (tear drop cutter) http://www.dickblick.com/products/premo-sculpey-mini-metal-clay-cutters/
Premo Clay/Sculpey Clay: (best prices I have found)
Sculpey Essential Tool Kit :
Sculpey Acrylic Roller, 5-in-1 tool, Blades :
Sculpey Bake & Bond :
ჱ
ܓƸ̵̡Ӝ̵̨̄Ʒ
My choice of Glaze is Fimo Glaze: I cant find it anywhere on line except in the Uk. But I do buy it locally at Joann Fabrics and Im told that Michaels Carrys it. It takes a while to dry. But it is one glaze that has been tested by many artists in blog settings on all glazes and it doesnt discolor, drys clear, is not sticky as long as you let it dry 24 hours. Once it drys it really gives a nice finish and also makes your creations stronger. I have had many items over a year and they look brand new. While other waxes and or glazes are pealing or discolored. My opinon only. But I love it. :)
ჱ
ܓƸ̵̡Ӝ̵̨̄Ʒ
My new favorite tool set: Penni Jo's New Clay Tool kid is wonderful. Cant go wrong with this purchase. Her molds and customer service are amazing too. http://bestflexiblemolds.com/PJClayTools.htm
ჱ
ܓƸ̵̡Ӝ̵̨̄Ʒ
Pasta Machine: I have two a Sculpey Pasta Machine and a Mankins both were purchased at Joann Fabrics.
ჱ
ܓƸ̵̡Ӝ̵̨̄Ʒ
Glitter was also purchased at Joann fabrics. I like the martha stewart glitter sets. Any glitter works fine.
Swarovski crystal elements can be purchased at firemountain or joann fabrics in many colors.